|
Orion HP-4600 - 4 Channel Power Amplifier
[HP-4600]
Features: Orion HP-4600
- Max Power 600w Peak
- 4 Ohm Rating 50w RMS x 4
- 2 Ohm Rating 75w RMS x 4
- Mono Rating 150 x 2
- Freq. Resp. 20 - 20khz
- THD+N < 0.1%
- Damping factor > 200
- Signal to noise ratio -80dBA
- Crossover range/scope HP/LP @ 100hz
- Input sensitivity 200mV - 5V
- Safe load impedance 2 ohm stereo
- Equalization Circuit Intelli Bass - 16 db
- Amplifier protection* T,D,R,S
- Externally Bridgeable No
- Dimensions** 9.8" x 10.2" x 2.4"
- *T - Thermal protection, D - DC offset protection, R - Reverse polarity protection, S - Short circuit protection, O - Over/under voltage protection
- All power ratings are @ 13.8VDC supply Voltage, all channels driven
- ** Amplifier dimensions are for heat sink only; add 2 1/2 inches per side to allow for end cap installation
|
|
|
