This pack consists of the following:

• Mutant MT802 - 2 channel 2 x 80w RMS amp
• Kenwood KFC-W110s - 10" Subwoofer - 700w Peak
• 10" Bass Box
• 10 guage amplifier wiring kit

Mutant 2 Channel Power Amplifier

• 320W Peak Power
• 2 x 50W RMS @ 4 Ohms (Stereo)
• 2 x 80W RMS @ 2 Ohms (Stereo)
• 1 x 160W RMS @ 4 Ohms (Bridged)
• PWM Mosfet Power Supply
• Frequency Responce 10Hz - 30kHz
• Integrated High / Lowpass Filters 12/db Oct.

Kenwood 10" Subwoofer specification

• Peak Input Power 700W
• Maximum Input Power 350W
• Rated Input Power 175W
• Woofer Cone material Injection P.P. Cone
• Speaker Basket Steel
• Speaker Surround Urethane
• Sensitivity 90dB/W/m
• Frequency Response 35Hz ~ 1000Hz
• Subwoofer Impedance 4Ω x 1
• Dimensions (W x H x D) 276 x 276 x 141mm
• Mounting Depth 120.8mm
• Mouting Hole Diameter Ø 230mm
• Speaker Weight 3010gr
• Gross Weight 3800gr
• Weight of Magnet 748gr

Single 10" Sealed Subwoofer Enclosure

• Single 10" Bass Box
• 18mm MDF throughout
• Silicon sealed
• Fully trimmed in carpet
• Gold terminals
• 0.75 cu ft chamber

Amplifier Installation Kit

• 6m 10GA Clear Red Power Cable
• 1.2m 10GA Clear Black Ground Cable
• 5m 18GA Black Remote (Trigger) Cable
• 6m Blue Trigger Cable
• 6m Clear RCA Cable
• 0.3m 10GA Clear Red Cable with ATC Fuse Holder
• 1.8m Split Loom Tube
• 1 ATC Fuse
• 7 White Screw Caps
• 1 Black Snap-In Grommet
• 2 Yellow But Connectors
• 7 Spade Terminals
• 2 Ring Terminals
• 3 Black Screws
• 10 Cable Ties